Get complete information related to latest Bitumen Membrane Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bitumen Membrane Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bitumen Membrane Tenders.
Tender For ktps-vii stage-civil-o and m-ii- a camps-arresting roof leakage by providing 3mm thick app modified bitumenmembrane treatment to the qtr.no.de-34 in c colony.
Tender For supply of supply of 3d printed reinforced concrete panels along with steel , supply of box sections of size 100x100x5mm , supply of 16mm tmt bars , pcc solid block class a bricks , stone patti slab each of size 900x300x50mm thick , paver block m 20 grade 60mm thickness , flexible polyurethane foams sealant 750ml , exterior weather proof paint , ms loop hole of size 900x400mm , ms door of size 900x1850mm , sand bag 18 inch x34 inch hdpe as per is 11652 , pbs roll , bitumen primer , opc 53 grade cement , well graded sand , all in one aggregate , 0 point 5 mm thick metal deck ppgi sheets , 12 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , distemper oil emulsion obd , w2 panel , clay bricks fly ash brick aac blocks pcc block cm 1colon 4
Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage near pottamuckal vaikal at nedungadu village panchayat in nedungadu commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega
Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage at konnakavaly in varichikudy village panchayat at kottucherry commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega
Tender For rrsmp-24-25 muzaffarpur east -1 -01 - t02 - bargaw to shankarpur, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 p
Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci
Tender For bid to ras tender for supply of tubing gi 15 mm med grade isi marked , tubing gi 20 mm med grade isi marked , glass sheet clear 1200 mm x 1200 mm x 3 point 8mm , cement in 50 kg pack , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , pvc pipe 100 mm , helical door spring isi marked , glass sheet frosted 1200 mm x 1200 x 3 point 8 mm , m seal in 90 gms pkt , pvc pipe 75 mm , gi union 15 mm med grade isi marked , elbow gi 15 mm med grade isi marked , thread for plumber , glass sheet frosted 600 mm x 1200 mm x 3 point 8 mm , cp brass extension nipple 15 mm x 150 mm , handle pvc with float valve for pvc low level cistren , gypsum screw black 20 mm , gi clamp for gi pipe , gypsum black screw 25 mm , aluminium hasp and staple of size 100 mm , white cement in 1 kg pack , gypsum black screw 30 mm , gypsum screw black 40 mm , mortice lock isi marked for aluminium door , end plug gi 15 mm , rawal plug 35 x 8 mm , stone aggregate 20 mm well graded , sand confirming to zone 3 , tee equal gi 20 mm suitable for gi pipe isi marked , blade cutter iron , washer for cistern , hammer drill bit 40 oblique 8 , pedestal for wash basin , washer for taps , dr fixit for water proofing 1 kg each , painting brush 100 mm , painting brush 50 mm , welding rod , lime quick , plywood bwr 8 feet x 4 feet x 18 mm , pipe clips 3 oblique 4 inch , floor trap 3 oblique 4 inch , p trap 110 x 110 mm , medium density fibreboard mdf both side laminated teak face 2440 mm x 1220 mm x 19 mm , plywood teak face one side 2440 mm x 1220 mm x 12 mm , french polish , beeding teak wood 20 mm x 6 mm , peg hook brass , plywood teakface one side 2440 mm x 1220 mm x 4 mm , lock for almirah squre type 65 mm , touch wood , form cushion 530 x 550 x 100 mm with cover tepastry cloth , spirit base polish spirit incl lakh dana and sundras , magnetic catcher , sliding channel for furniture steel , handle cp for steel almirah as per sample , knob 40 mm brass , screw 50 mm black , screw 40mm black , nails wire 25 mm , screw 60mm black , nails 40 mm 17 oblique 19 no , fevicol sh 1kg pkt , paint synthetic enamelled white 1st quality pack of 4 ltr , paint synthetic enamelled black 1st quality 4 ltr pack , prelaminated board both side laminated 2440 mm x 1220 mm x 12 mm , paino hinges , ss handle d type 75 mm , mdf post forming pft board of size 900 mm x 450 mm x 18 mm , mdf post forming pft board of size 600 mm x 450 mm x 18 mm , mdf post forming pft board of size 1200 mm x 600 mm x 18 mm , plywood bwp 2400 mm x 1200 mm x 12 mm , round conevx mirror of diameter 80 cm made with flexiable polycarbonate front of 0 point 8 mm thickness reinforeced with plastic back of 3 mm thickness with 6 ft height and 50 mm diameter ms pole medium grade duly painted with two coats of synthetic enamel paint over a coat of red oxide primer , road marking paint water based white , road marking paint water based black , road marking paint water based green , road marking paint water based yellow , abs speed breaker h 50 w 350 l 250 , abs speed breaker h 75 w 500 l 425 , abs speed breaker h 50 w 380 l 500 , automatic star delta starter 60 hp , gi tubing 20 mm medium grade , ppr gate valve 20mm , glass sheet frosted 600 mm x 1200 x 3 point 8 mm , pre laminated particle board 8 feet x 4 feet x 12 mm , gi tubing 15 mm medium grade , gi tubing 25 mm medium grade , gi tee 15 mm , bitumen tarfelt 1 mtr wide x 20 mtr long , hack saw blade double edge , brass nozzle 20 mm for fountain , gi tubing 40 mm medium grade , aluminium inline connector 300 sqmm , gi tee 20 mm , mortice lock isi marked for aluminium door , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , gi nipple 15 mm dia 150 mm long , gi nipple 20 mm dia 150 mm long , aluminium inline connector 185 sqmm , gi elbow 20 mm , ppr pipe 32 mm , brass nozzle 15 mm for fountain , gi union 20 mm , insualtion tape self adhesive 20 mm x 25 mtr long , cement 43 grade 50 kg bag each , automatic star delta starter 12 point 5 hp , gi socket 20 mm , frame plate 12 modular ,
Tender For corrigendum : supply of material for the work of construction of post harvesting facilility structure and pucca storage facilities at soriankuppam village panchayat in bahour commune of ariyankuppam block, puducherry. - [ psr code no.0983 - pdy ] supply of fine sand (zone iv), [ psr code no.0810 a - pdy ] supply of gravel, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of vibrator (needle type 40 mm), supply of portland cement, [ psr code no.0295 - pdy ] supply of stone aggregate (single size) : 20mm nominal size, [ psr code no.0982 - pdy ] supply of coarse sand (zone iii), [ psr code no.0293 - pdy ] stone aggregate:40mm nominal size, [ psr code no.0297 - pdy ] supply ofstone aggregate (single size) : 10 mm nominal size, supply of common burnt clay f.p.s. (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100 mm channel shoulder 2.5 m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s. tube 40 mm dia, supply of twisted steel/deformed bars, [9999a] supply of m30 grade cover block, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of flame retardant face inslulating, impregnated fibre board 12 mm thick, supply of deharadun white lime, hire charges of a welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of precoated glavanished iron profile sheet 0.50 mm tct, supply of g.i. plain washer thick, supply of bitumen washer, supply of galvanised steel j or l hooks 8 mm dia, supply of mild steel sheets for tanks, structural steel such as tees, angles, channels and r.s. joists, supply of iron pintels including weldded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of mild steel hooks, supply of synthetic enamel paint in black or chocolate shade, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, production cost of concrete by batch mix plant, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of c.i. pile shoe, hire charges of m.s. clamps for pile shoe, supply of plasticizer / super plasticizer, providing one number of citizen information board of size 0.90 x 1.20m for community work as per the standard drawing of mord. mgnrega (r.c.c. precast)